TDK Banner


• Three-phase 208VAC
(170VAC ~ 265VAC)
• Wide-range three-phase 400VAC/480VAC (342VAC ~ 528VAC)
• Active three-phase PFC
(0.94 typical)
• High power density (10kW in 2U height) in 19” rack-mount
• Light-weight (< 34.1lbs)
• Multi-functional front panel display
• Arbitrary Waveform Generator
• Slew-Rate Control (V/I)
• Internal Resistance programming
• Constant Power Limit
• Pre-Load Control
• Last Setting Memory
• Safe-Start/Auto-Restart
• Protection functions (OVP, UVP, UVL, FOLD (CV/CC), OCL, OTP, AC FAIL)
• Built-In LAN, USB and
• Multi-Drop capability (RS-485)
• Built-In Isolated Analog Program/Monitor and Control
• Optional IEEE Interface
• Optional Modbus-TCP Interface
• Optional EtherCAT Interface
• Worldwide Safety Agency approvals
• CE Mark for Low Voltage, EMC and RoHS3 Directives
• Five year warranty
• Software Drivers available

GenesysPLUS Logo - 1U HR: 1.5kW

GenesysPLUS Logo - 1U: 1.7kW
GenesysPLUS Logo - 1U: 2.7kW
GenesysPLUS Logo - 1U: 3.4kW
GenesysPLUS Logo - 1U: 5kW
GenesysPLUS Logo - 3U: 15kW

GENH-1U (750W)
GEN-1U (750W/1.5kW)
GEN-1U (2.4kW)
GEN-2U (3.3kW)
GEN-2U (5.0kW)
GEN-3U (10kW)
GEN-3U (15kW)

ESS (10kW/15kW)
EMHP (15kW-90kW)

Follow us on twitter
2U 10kW Programmable DC Power Supply
Outputs from 10V (0-1000A) to 600V (0-17A)

Click here to request more GenesysPLUS Logo
2U 10kW Information
GenesysPLUS(TM) 2U 10kW Programmable Power

  • Overview
  • Technical Details
  • Downloads
  • Technical Support

Product Overview and Models

The GenesysPLUS Logo 2U Full-Rack series of 10kW DC Programmable Power Supplies provides advanced features and functions in high power density (up to 10.4kW) and light weight (< 34.1lbs) with a comprehensive set of user-friendly interfaces.

This series offers low-noise performance with Output voltages from 10V (0-1000A) to 600V (0-17A) in both a three-phase 208VAC Input (170-265VAC, 47-63Hz) and a wide-range three-phase 400VAC/480VAC Input (342-528VAC, 47-63Hz), both with Active Power Factor Correction (0.94 typical @ rated load).

Advanced features and functions include an Arbitrary Waveform Generator (with Auto-Trigger capability), programmable Slew-Rate control (Vout/Iout), Internal Resistance simulation and Constant-Power Limit programming, which are accessible through a front panel LCD display that has five embedded multi-functional Power Supply Setup menus (that address Digital Communication, Protective Functions, Operating Configuration, System Configuration, and System Triggering).

Multiple built-in standard remote programming methods are available including the built-in Remote Isolated Analog Program/Monitor (5V/10V) & Control and Remote Digital Serial Communication Interfaces (LAN (LXI 1.5), USB and RS-232/RS-485) along with an optional optional IEEE Interface (IEEE 488.2 & SCPI compliant), Modbus-TCP (TCP/IPv4) or EtherCAT (COE) Interface.

All models are CE Marked in accordance with the Low Voltage, EMC and RoHS2 Directives, have worldwide Safety Agency approvals (UL/cUL 60950-1 and EN 60950-1 listed) and offer a five (5) year warranty.

Model Number

Rated Power




mV p-p



GSP10-1000 10.0 0-10 0-1000 8 75 89.5
GSP20-500 10.0 0-20 0-500 10 75 90
GSP30-340 10.2 0-30 0-340 12 75 91
GSP40-250 10.0 0-40 0-250 12 75 91
GSP60-170 10.2 0-60 0-170 12 75 91
GSP80-130 10.4 0-80 0-130 15 80 91
GSP100-100 10.0 0-100 0-100 15 90 91
GSP150-68 10.2 0-150 0-68 20 120 91
GSP200-50 10.0 0-200 0-50 45 200 91
GSP300-34 10.2 0-300 0-34 60 200 92
GSP600-17 10.2 0-600 0-17 100 480 92


Ordering Information - Standard Scalable System (10kW)






Factory Options


AC Input


10 - 1000 - IEEE - 3P208
          MDBS   3P480

Ordering Information - Blank Front Panel Scalable System (10kW)






Factory Options


AC Input


10 - 1000 - IEEE - 3P208
          MDBS   3P480


The GenesysPLUS Logo (GSP) 2U Full-Rack series of 10kW DC Programmable Power Supplies provides a higher level of programmable power supply performance with advanced features and functions in high power density (up to 10.4kW) and light weight (< 34.1lbs).

Utilizing embedded microprocessor technology, the GenesysPLUS Logo product platform provides advanced performance and functionality well suited for the Laboratory/R&D environment and addresses broad market segments including Aerospace Test & Measurement, Automotive Component, Module and System Test, Semiconductor Fabrication & Component Test, Industrial and Renewable/Alternative Energy.

Carrying a five (5) year warranty and built into a 2U (3.5”) high, 19” (483mm) wide, and 17.38” (441.5mm) deep rack-mount mechanical profile, the GenesysPLUS Logo 10kW Power Supply Series offers high power density in a lightweight 31.4lbs (15.5kg) package.

Ten models are currently available from 10V to 600V with outputs of 10V/5000A, 20V/500A, 30V/340A, 40V/250A, 60V/170A, 80V/130A, 100V/100A, 150V/68A, 300V/34A and 600V/17A with conversion efficiencies up to 92%. These units can operate in Constant-Current (CC) and Constant-Voltage (CV) mode and can be power limited with a newly offered programmable Constant-Power (CP) limit function. An Internal Resistance simulation feature is also available to emulate battery source resistance.

Three-phase AC Input options include 208VAC (170~265VAC) and a wide-range 400VAC/480VAC (342~528VAC) and have built-in Active Power Factor Correction (0.94 typical) with cooling fan speed control (for reduced audible noise and extended life).

In addition to increasing the power density over the existing 3U Genesys™ 10kW Programmable Power Supply Series, the GenesysPLUS Logo 10kW platform offers other significant advancements. These include a high contrast, wide viewing angle multi-segment front panel LCD display (with user controllable brightness and dimming functions for improved readability) that has five embedded multi-functional Power Supply Setup menus that address Digital Communication, Protective Functions, Operating Configuration, System Configuration, and System Triggering. These embedded menus offer new adjustable user-selectable functions including internal resistance simulation (CV mode), Constant-Power limit (CV/CC mode) and Slew-Rate control of Output Voltage/Current. Arbitrary waveform profiles, such as vehicle battery start-up simulation, of up to 100 steps can also be generated and stored in four on-board memory cells and can be recalled and activated via the front panel display embedded menus or Remote Digital communication (LAN (LXI 1.5), USB or RS-232/RS-485).

Standard safety features include user-selectable Safe-Start/Auto Re-Start, Last Setting Memory and various built-in protective functions. With Safe-Start configured, the power supply returns to its last operational settings after a power interruption but with the output disabled. With Auto Re-Start, the power supply returns to the last used operation settings after a power interruption. Last Setting Memory retains settings such as the Output voltage/current, Output ON/OFF, Output OVP/UVL/UVP level, Fold-Back (CV or CC), Output Over-Current Limit (OCL) and Start-Up mode (SAFE or AUTO) at each AC input turn-off sequence. Built-in protective functions include Output Over-Voltage Protection (OVP), Output Under-Voltage Limit (UVL), Output Under-Voltage Protection (UVP), Fold-Back protection (FOLD) for CV or CC mode, Output Over-Current Limit (OCL), AC Fail (AC) and Over-Temperature protection (OTP).

All model functions can be programmed locally via the menu-driven front panel display or remotely using one of the three built-in standard Remote Digital communication interfaces (all of whose communication protocols and signals are compatible with the entire TDK-Lambda Genesys™ Series). These interfaces include the LAN (LXI 1.5), USB (2.0) and RS-232/RS-485 and an optional IEEE (IEEE 488.2) or Modbus-TCP (TCP/IPv4) Digital communication interface.

All Remote Digital communication interfaces are SCPI-compliant, have Multi-Drop capability (where up to 31 units to be controlled in an addressed RS-485 Multi-Drop configuration) and have a full selection of software instrument drivers along with an Advanced Virtual Front Panel GUI (with Waveform Profiler and Solar Array mode functionality).

A built-in standard Remote Isolated Analog Program/Monitor/Control Interface (with 600V isolation) is also provided with new functions such as Output control pins (for activation of external devices for polarity reversal/load disconnect), Trigger-In/Trigger-Out pins (for synchronization), Enable control (with user-selectable polarity) and higher accuracy Program/Monitor signals.

Two new GenesysPLUS Logo mechanical options are a Blank Front Panel and an Air Filter Kit. The Blank Front Panel is available for applications where the front panel display and controls are not required and only remote interfacing (Digital/Analog) is needed. The Air Filter Kit has a removable snap-in filter (for easy maintenance) and is provided for dusty air environment applications.

The GenesysPLUS Logo 10kW Power Supply Series has Safety certifications to IEC/EN/UL/cUL 60950-1 with CE marking in accordance with the Low Voltage, EMC (IEC/EN61204-3; industrial environment) and RoHS2 Directives.

For more information about the TDK-Lambda 2U Full-Rack GenesysPLUS Logo 10kW AC/DC Programmable Power Supply Series, please visit the TDK-Lambda Americas Programmable & High Voltage website and fill out an online Information Request @

A wide range of other TDK-Lambda Programmable and High Voltage Division Low Voltage and High Voltage power supplies can be viewed from the website at



AC Input
Three phase 208VAC (170VAC-265VAC)
Three phase 400VAC/480VAC (342VAC-528VAC)
PF=0.94 typical @ AC low line condition

DC Output
Line Regulation (CV): 0.01% of Vo(rated)
Load Regulation (CV): 0.01% of Vo(rated) + 5mV
Line Regulation (CC): 0.05% of Io(rated)
Load Regulation (CC): 0.08% of Io(rated)

Advanced Features/Functions
Arbitrary Waveform Generator with Digital Auto-Trigger Programmable Slew Rate Control (Output V/I)
Internal Resistance programming
Constant Power limit
Pre-Load Control
Over-Current Limit (OCL)
Enable Polarity Setting
Control Pins (for Load Disconnect or Polarity Reversal)
Advanced Parallel Operation


Protective Features

Remote Analog: 0-5V/0-10V settable via front panel or digital communication (600V isolation)
Remote Digital: LAN, USB, RS-232/RS-485; optional IEEE or Modbus-TCP

Width = 19” (482.6mm)
Height = 3.5” (88.9mm)
Depth = 17.38” (441.5mm)
Weight: Lee than 34.1lbs (15.5kg)
• Outline Drawing - Standard Front Panel
• Outline Drawing - Blank Front Panel

Interface Options
(Factory installed, embedded, one per supply)

• Remote Digital: IEEE
• Remote Digital: MDBS (Modbus-TCP)

All specifications subject to change without notice.
Factory Technical Support Contacts

Low Voltage Products - 6V to 1500V
(Genesys™, Genesys+, ESS, EMHP, EMS, TCR etc, and other models with Vout<=1500V)
Support Hours 8am-4.30pm Eastern
Standard Time
Jeff Bush - Email
Tel: (732) 795 4141
Fax: (732) 922 1441
© Copyright 1999-2020 TDK-Lambda Americas Inc. All rights reserved. Legal Information