TDK Lambda Americas Inc
TDK World Wide

 


November 9, 2004 Editor Contacts:
Stan Michelson, Focus Communications
562-283-0388
stan@4focus.com

Lambda Launches DIN Rail-Mount Power Supply Redundancy Module

SAN DIEGO, CA (November 9, 2004) - Lambda has introduced a DIN rail-mount power supply module that can connect two power supplies in 1+1 redundancy. Applications for the new DLPPU series include process control and critical monitoring equipment where downtime would cause extensive and costly manufacturing delays.dlp-pu

The DLP-PU accepts up to two 20-amp inputs rated between 21 and 28 volts and contains internal ORing diodes to isolate the effects of a faulty power supply on the system bus. LEDs indicate input status, and the status of each output can be monitored using the power supply's normally open or normally closed relay contacts; a fault is indicated if the input falls below 19.2 volts or rises above 30 volts.

The new power unit measures a compact 3.81 x 4.33 x 1.97 inches and is rated 20 amps 60°C, derating to 12-amps at 70°C. The device is approved to UL508, UL60950, EN60950 standards and carries the CE mark.

The DLP-PU is available now, with prices starting at $91 in single-unit quantities. More information can be obtained at Lambda’s Web site, www.lambdapower.com.

For more than 50 years, Lambda has been a leading provider of standard and custom power supply solutions. The company's broad range of products power industrial, telecommunications, data communications, medical, and test-and-measurement applications worldwide. Lambda's corporate headquarters is at 3055 Del Sol Blvd., San Diego, Calif., 92154; telephone 800-LAMBDA4 (toll free) or 619-575-4400; fax 619-429-1011.

- ### -

For additional photo formats – including color transparencies, 35mm slides, B&W prints, or electronic files of the attached image(s) – please phone Focus Communications at 562-283-0388.