TDK Lambda Americas Inc
TDK World Wide

 


Power Supply Products

250W Medical and ITE 3x5” Footprint Power Supplies are 94% EfficientSan Diego, CA – June 2016 –

TDK Corporation introduces the TDK-Lambda CUS200M series of medically and ITE certified power supplies.  Featuring efficiency levels of up to 94%, internal heating is reduced allowing electrolytic capacitor life to be extended.  The CUS200M can deliver 200W convection cooled and up to 250W with 1.5m/s airflow and is packaged in the industry 3” x 5” standard footprint.  Applications include hospital, dental, broadcast, test and measurement equipment, particularly where audible fan noise is not desired.

Operating from a universal input of 85-265Vac, the CUS200M series is available with nominal outputs of 12, 18, 24 and 48Vdc, which can be adjusted via a potentiometer.  All the models can deliver full power with ambient temperatures of -20 to +50oC and 50% power at +70oC.  An open collector DC good signal, remote on/off and a 5V standby output (0.6A convection, 1A forced air) is included as standard on all models.  Off-load power draw is less than 0.5W when in standby mode.

The CUS200M series is safety certified to ANSI/AAMI ES 60601-1, IEC/EN 60601-1, IEC/UL/EN 60950-1 and carries the CE mark for the Low Voltage and RoHS2 Directives.  With an input to output isolation of 4,000Vac (2 x MOPPs), 2,000Vac input to ground (1 x MOPP) and 1,500Vac (1 x MOPP) output to ground, the series can be used in BF rated medical equipment.  The series is also compliant to EN 55011-B, EN 55022-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.

More information can be obtained at the following TDK-Lambda Americas website, https://www.us.tdk-lambda.com/lp/products/cus-m-series.htm, or by calling 800-LAMBDA-4.  Product availability for the CUS200M series can be found via the link to TDK-Lambda’s distributor network (click on the “Check Distributor Stock” icon) at https://www.us.tdk-lambda.com/lp/.

-----

Major applications

Industrial process control, communications, hospital, dental, broadcast and test and measurement equipment.

Main features and benefits

  • Up to 94% efficient
  • Industry standard 3x5” footprint
  • 5V standby, remote on/off and DC Good signal
  • Medical and ITE certifications

Major specifications

-----

About TDK Corporation

TDK Corporation is a leading electronics company based in Tokyo, Japan. It was established in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK's portfolio includes electronic components, modules and systems* marketed under the product brands TDK and EPCOS, power supplies, magnetic application products as well as energy devices, flash memory application devices, and others. TDK focuses on demanding markets in the areas of information and communication technology and consumer, automotive and industrial electronics. The company has a network of design and manufacturing locations and sales offices in Asia, Europe, and in North and South America. In fiscal 2016, TDK posted total sales of USD 10.2 billion and employed about 92,000 people worldwide.

* The product portfolio includes ceramic, aluminum electrolytic and film capacitors, ferrites, inductors, high-frequency components such as surface acoustic wave (SAW) filter products and modules, piezo and protection components, and sensors.

About TDK-Lambda

TDK-Lambda Corporation, a group company of TDK Corporation, is a leading global power supply company providing highly reliable power supplies for industrial equipment worldwide. TDK-Lambda Corporation meets the various needs of customers with our entire range of activities, from research and development through to manufacturing, sales, and service with bases in five key areas, covering Japan, Europe, America, China, and Asia.

For more details, please pay a visit to http://www.tdk-lambda.com/

Downloads

Editorial Contact:

Tom Tillman, Director of Marketing
TDK-Lambda Americas Inc.
401 Mile of Cars Way, Suite 325
National City, CA 91950
Ph: 619-575-4400
Email: tom.tillman@us.tdk-lambda.com