|
TDK-Lambda 2500 Watt Server Power Supply Achieves 80 PLUS Platinum Efficiency
San Diego, CA – May 2012 — TDK Corporation announces that the TDK-Lambda Model HFE2500-48 power supply has now been certified
to the 80 PLUS® Platinum level for redundant, server, and data center applications.

The 80 PLUS performance specification requires power supplies to be 80% or greater energy efficient at 20%, 50% and 100% of rated load with a true
power factor of 0.90. This makes 80 PLUS certified power supplies substantially more efficient than typical supplies. Moreover, the 80 PLUS Platinum
efficiency level, to which the HFE2500-48 has been certified, is much more stringent.
The HFE2500-48 operates with a nominal 230Vac input and provides a 48Vdc, 2500 watt, output and delivers over 92% efficiency at 20% load, 94%
efficiency at 50% load, and over 92% efficiency at 100% load (see attached efficiency graph). In addition, this supply exceeds the required
power factor of 0.95 at 50% load with a measured power factor of 0.97.
The TDK-Lambda HFE2500 series are ideal for data center, distributed power, hot-pluggable and redundant power systems. The supplies can operate
off a universal AC input of from 85 to 265VAC, with active PFC, and provides a well regulated DC output of 12V, 24V or 48V.
With the 19-inch rack-mount enclosure, as many as four supplies can be paralleled with automatic load-sharing to provide up to 9.5kW of output
power. A popular option is an integral MCU in each supply that allows for remote programming, monitoring, and status reporting via an isolated
I2C and PMBus interface. In addition, an "energy-saving" feature of the I2C/PMBus interface is that rack-mounted HFE2500
supplies can be individually turned On/Off as the total system load demand varies over time (aka "load-shedding").
Key applications for the HFE2500 series include data centers, wireless base stations, industrial automation, telecommunications, RF power amplifiers,
network equipment, storage systems and distributed power architectures (DPA).
The HFE2500 supplies, each measuring only 1.61"H x 4.21"W x 12.8"L, can be used individually or as many as four (4) can be mounted in an 1U-high
19-inch rack enclosure to form a paralleled connected, load-sharing, hot-swap, N + M redundant 9.5kW power system. Should a fault occur each supply
has an internal ORing MOSFET switch that will automatically disconnect it from the load and the other paralleled supplies. In addition, alarm signals
and LED indicators are provided to identify a faulty unit.
When employing the model HFE2500-S1U rack-mount enclosure, the DC outputs and current-share lines of each plugged-in HFE2500 supply are automatically
connected in parallel with the others. In this way, scalable and expandable power is easily achieved, even in the field.
For higher power applications, two 19" power racks containing up to eight (8) model HFE2500 supplies can be zero-stacked (no space required between
racks) and connected in "parallel" or "series" to provide up to 19kW of total output power in a compact 2U vertical space.
Each HFE2500 supply has two temperature controlled variable-speed fans and can operate in temperatures ranging from -10°C to +70°C. The
airflow is directed from the front to the rear of each unit, where the I/O connectors are located.
For system monitoring, in addition to the optional I2C/PMBus interface, opto-isolated signals are provided including DC-OK, AC-Fail and
Over-Temperature. Front-panel mounted LED indicators provide a visual status for DC-OK and AC-OK conditions. A remote On/Off control is also
standard, as well as remote-sense to compensate for voltage drops in the cables that connect the supply outputs to the load. Other standard features
include single wire current-share and an auxiliary 12V/0.5A output that is diode OR'd. Remote programming of the output voltage and current can be
accomplished via the I2C and PMBus interface, or with an external 0-5V signal or a 1k ohm potentiometer.
The 19-inch rack mount enclosure is available with AC inputs via IEC inlet, type C20 connectors or terminal blocks for each of the four power module
slots. All units in the HFE2500 series are fully RoHS-compliant, carry the CE mark and meet UL/EN60950-1 safety specifications, as well as EN55022
and FCC class B EMC conducted specifications; radiated EMC performance complies with class A requirements.
The TDK-Lambda HFE2500 power supplies are available now and priced from $689.00 each in quantities of 100 units. For more information call
TDK-Lambda Americas at 1-800-LAMBDA-4 or download the product datasheets from: http://www.us.tdk-lambda.com/lp/products/hfe-series.htm
- ### -
About TDK Corporation
TDK Corporation is a leading electronics company based in Tokyo, Japan. It was established in 1935 to commercialize ferrites, a key material in
electronic and magnetic products. TDK's current product line includes passive components, magnetic application products as well as energy de-vices,
flash memory application devices, and others. TDK today focuses on demanding markets in the areas of information and communication technology and
consumer, automotive and industrial electronics. The company has a network of design and manufacturing locations and sales offices in Asia, Europe,
and in North and South America. In fiscal 2011, TDK posted total sales of USD 10.6 billion and employed about 88,000 people worldwide.
Editorial Contact:
Mel Berman, Product Marketing Manager
TDK-Lambda Americas Inc.
3055 Del Sol Blvd.
San Diego, CA 92154
Ph: 619-628-2859
Email: mel.berman@us.tdk-lambda.com
|