TDK Banner
DOWLOADS
DOWNLOADS

FEATURES
• Active PFC
PF of 0.94 for 3Φ
• Built in RS232/RS485
• Standard Multi-Drop (RS-485) Slave Interface
• Global Commands for RS-232/RS-485
• Last Setting Memory
• High Resolution 16 bits ADCs & DACs
• Reliable Encoders for Voltage and Current Adjustment
• Parallel Operation with Active Current Sharing and Current Sum
• Independent Remote ON/OFF and Remote Enable/Disable
• External Analog Programming and Monitoring
• Reliable Modular and SMT Design
• Optional Isolated Analog Programming and Monitoring
• Optional built-in GPIB (SCPI) Interface
• Optional built-in LXI Compliant LAN interface
• Optional built-in IEEE interface
• Optional built-in Isolated Analog Programming
• 19" Rack mounted
• Five Year Warranty
LabView® drivers/GUI
• Worldwide Safety Agency Approvals
• CE Mark for LVD and EMC Regulation

OTHER SOLUTIONS
GENH-1U (750W)
GEN-1U (750W/1.5kW)
GEN-1U (2.4kW)
GEN-2U (3.3kW)
GEN-3U (10kW)
GEN-3U (15kW)
ESS (10kW/15kW)
EMHP (15kW-90kW)
 
Genesys™ 2U 5kW Programmable DC Power Supply
Outputs from 8V (@600A) to 600V (@8.5A)
Click here to request more Genesys™ 2U 5kW Information

  • Overview
  • Technical Details
  • Downloads
  • Technical Support

Product Overview and Models

The Genesys™ 2U Full-Rack (GEN-2U) series of 5000W DC Programmable Power Supplies provides high power density (up to 5200W) with a complete set of user-friendly interfaces within a 2U profile.

This series offers Output voltages from 8V (@ 600A) to 600V (@ 8.5A) in both a Three-phase 208VAC Input (170-265VAC, 47-63Hz) and Three-phase 400VAC Input (342-460VAC, 47-63Hz) with Active Power-Factor Correction (0.94 @ rated load).

Multiple remote programming methods are available including the built-in Remote Analog Program/Monitor and Remote Digital Serial Communication (RS-232/RS-485) Interfaces along with the optional LXI certified LAN, IEEE (IEEE 488.2 & SCPI compliant), USB (2.0 compliant) and Isolated Analog (5V/10V and 4-20mA) Interfaces.

All models are CE Marked in accordance with the Low Voltage and EMC Directives, are RoHS compliant, have worldwide Safety Angency approvals (UL/cUL 60950-1 and EN 60950-1 listed) and offer a five (5) year Warranty.

Model Number

Rated Power
(Watts)

Output
Voltage
(Volts)

Output
Current
(Amps)

Ripple mV RMS
(5Hz-1MHz)

Noise p-p
(<20MHz)

Efficiency
%
(100/200VAC)

Datasheet

Buy Online

GEN 8-600 4800 0-8 0-600 10 75 84
GEN 10-500 5000 0-10 0-500 10 75 84
GEN 16-310 4960 0-16 0-310 10 75 84
GEN 20-250 5000 0-20 0-250 10 75 86
GEN 30-170 5100 0-30 0-170 10 75 86
GEN 40-125 5000 0-40 0-125 10 75 88
GEN 60-85 5100 0-60 0-85 10 75 90
GEN 80-65 5200 0-80 0-65 12 80 88
GEN 100-50 5000 0-100 0-50 15 100 88
GEN 150-34 5100 0-150 0-34 25 120 88
GEN 200-25 5000 0-200 0-25 45 200 88
GEN 300-17 5100 0-300 0-17 35 200 88
GEN 400-13 5200 0-400 0-13 70 350 88
GEN 500-10 5000 0-500 0-10 70 300 88
GEN 600-8.5 5100 0-600 0-8.5 120 500 88

 

Ordering Information

Model

Voltage

 

Current

 

Factory Options

 

AC Input

GEN

60 - 85 - LAN - 3P208
          IEMD   3P400
          USB    
          IS510    
          IS420    

 

The Genesys™ family of programmable AC/DC power supplies sets a new standard for flexible, reliable, power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 2.4kW, 3.3kW, 5kW, 10kW and 15kW) and with output voltages from 8 to 600V and current up to 1,000A. Active PFC, Standard RS-232/RS-485 and world-wide inputs head a long list of standard features.

This member of the Genesys™ product family of programmable switching power supplies provides high power density, low ripple and a complete set of user-friendly interfaces. In addition to high power density, popular worldwide three phase inputs are available. Inputs are available for 208VAC or 400VAC - three phase, 50/60Hz with Active Power Factor Correction of 0.92-0.94. This assures operation in difficult AC environments and meets European EMC requirements.

A user-friendly front panel provides reliable control through encoders selectable for fine or course adjustment (~6 or 30 turns) and four digit LED Voltage and Current meters. Adjustable OVP, UVL and Current Foldback provide further flexibility. Their set values may be previewed on the front panel display, even with Output Off. The Foldback may be set to latch output off if desired for safety.

All Genesys™ platforms include several other important features. Up to four like units may be connected in parallel and user configured for the Master to Program and Monitor the total current of the group. Thus, four units can appear as a single 3kW to 60kW power supply, increasing flexibility for system designers.

Significant safety features include Safe Re-Start and Last Setting Memory. With Safe Re-Start, the user can select whether the Genesys™ power supply returns to previous settings after power off, or returns to zero (safe) output, waiting for user instructions. Last Setting Memory retains settings of output voltage and current, remote or local mode, OVP and UVL, Foldback, Baud Rate and Start-Up Mode, without battery. Front Panel controls also include Output On/Off and Local/Remote Digital selection. The Front Panel may be locked locally or by software command.

All Genesys™ products includes standard, embedded 16 bit RS-232/RS-485 digital interface. Through this digital interface up to 31 power supplies may be controlled in daisy chain over the RS-485 line. Analog remote programming is user selectable 0-5V or 0-10V via DIP switches on the rear panel. The design of Genesys™ power supplies is highly modular. SMT technology provides high reliability.

Among standard digital features, Multi-Drop allows an IEEE or LAN Master to control standard Slaves over RS-485, avoiding the cost of a GPIB or LAN board in every slave power supply. Up to 31 may be addressed over the RS-485 lines of Master and Slaves.

Interface Options
Digital and isolated analog interfaces are optional, factory installed, one per power supply.

Optional GPIB digital interface, IEMD, is IEEE488.2 & SCPI compliant. Labview Drivers are available.

The LXI Certified LAN Interface option for the Genesys™ family has been improved adding TCP and UDP Sockets, Socket Terminator flexibility and provision for multiple controllers. Network Security Settings have improved control features. Input Buffer size has also been increased. Standard features include Fast Start-up, Fixed and Dynamic Addressing and LAN Fault Detectors. A LAN equipped Master can also communicate with standard Slaves over RS-485. The interface is compatible with most standard Networks.

Isolated analog programming options include either 0-5V & 0-10V or 4-20ma control.

All models are CE Marked and offer five (5) year Warranty.

For more information about the Genesys™ AC/DC Programmable Power Supply Series, contact the TDK-Lambda Americas High Power Division directly at +1-732-922-9300 or online at - http://www.us.tdk-lambda.com/hp/sales_html/cont_saless.htm, or contact your local Sales representative (http://www.us.tdk-lambda.com/hp/sales_html/us_representatives.htm).

A wide range of other TDK-Lambda High Power Division Low Voltage and High Voltage power supplies can be viewed from the website: http://us.tdk-lambda.com/hp/

Specifications

AC Input
Three phase 208VAC
170-265VAC 47-63 Hz, with active PFC
PF=0.94, Imax=21.5A

Three phase 400VAC
342-460VAC 47-63 Hz, with active PFC
PF=0.94, Imax=10.7A

Output Characteristics
Regulation:
0.01% line (cv)
0.015% + 5mV load (cv)
0.05% line (cc)
0.1% load (cc))

Protective Features
Adjustable OVP, UVL
Front Panel Lock
Adjustable Current Foldback
Over-temperature
Safe/Auto Start

 

Programming
0-5V, 0-10V User Selectable via DIP Switch
RS-232/RS-485 Standard
Parallel Master/Slave setting reports total current of up to four like supplies connected in parallel

Mechanical
Size:
All models 19" W x 2U (3.5") H x 17" D Weight: 36lbs/16kg
Rack Slide:
GENERAL DEVICES: C-300-S-116 or equivalent.
Mounting hardware is three 10-32 x 0.38screws each side.
Outline Drawing

Interface Options
(Factory installed, embedded, one per supply)

• LAN - LXI Certified
• IEEE (MD) Master P/N: IEMD
Controls MD slaves via RS-485
• USB
• Isolated Analog Program/Monitor
Allows operation with floating references and in harsh electrical environments.
IS510 - 0-5V & 0-10V User Selectable
IS420 - 4-20mA


All specifications subject to change without notice.
Factory Technical Support Contacts

Low Voltage Products - 6V to 1500V
(Genesys(TM), ESS, EMHP, EMS, TCR etc, and other models with less than 600V outputs)
Support Hours 8am-4.30pm Eastern
Standard Time
Jeff Bush - Email
Tel: (732) 922 9300 x209
Fax: (732) 922 1441
 
© Copyright 1999-2017 TDK-Lambda Americas Inc. All rights reserved. Legal Information